[SFLphone] Making it work out of the box

Sat Jun 20 13:40:07 EDT 2009

forgot to add some pulseaudio debug...

> I'm testing it with a clean Jaunty install and also with a clean
> Karmic install.  Both have problems related to pulseaudio.
> 
> When i dial a number i only can hear the first digit dialed, then only
> silence.
> 
> if i clic on     the voicemail button i can hear the password message
> played by my pbx but after that it's only silence.
> 

Adding the output from pulseaudio -vvvv 

I: client.c: Created 5 "Native client (UNIX socket client)"
D: protocol-native.c: Protocol version: remote 15, local 15
I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
D: protocol-native.c: SHM possible: yes
D: protocol-native.c: Negotiated SHM: yes
D: module-augment-properties.c: Looking for .desktop file for sflphoned
D: module-suspend-on-idle.c: Sink alsa_output.pci_8086_284b_sound_card_0
becomes busy.
I: resampler.c: Forcing resampler 'copy', because of fixed, identical
sample rates.
D: resampler.c: Channel matrix:
D: resampler.c:        I00 
D: resampler.c:     +------
D: resampler.c: O00 | 1,000
D: resampler.c: O01 | 1,000
I: resampler.c: Using resampler 'copy'
I: resampler.c: Using s16le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432,
tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: sink-input.c: Created input 4 "SFLphone out" on
alsa_output.pci_8086_284b_sound_card_0 with sample spec s16le 1ch
44100Hz and channel map mono
I: protocol-native.c: Requested tlength=113,38 ms, minreq=10,66 ms
D: protocol-native.c: Traditional mode enabled, modifying sink usec only
for compat with minreq.
D: memblockq.c: memblockq requested: maxlength=66500, tlength=10000,
base=2, prebuf=9062, minreq=940 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=66500, tlength=10000,
base=2, prebuf=9062, minreq=940 maxrewind=0
I: protocol-native.c: Final latency 194,65 ms = 92,06 ms + 2*10,66 ms +
81,27 ms
D: alsa-sink.c: Requested volume: 0: 100% 1: 100%
D: alsa-sink.c: Got hardware volume: 0: 100% 1: 100%
D: alsa-sink.c: Calculated software volume: 0: 100% 1: 100%
I: alsa-source.c: Trying resume...
D: alsa-source.c: hwbuf_unused=0
D: alsa-source.c: setting avail_min=1
I: alsa-source.c: Resumed successfully...
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_284b_sound_card_0 becomes idle.
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_284b_sound_card_0 becomes busy.
I: resampler.c: Forcing resampler 'copy', because of fixed, identical
sample rates.
D: resampler.c: Channel matrix:
D: resampler.c:        I00   I01 
D: resampler.c:     +------------
D: resampler.c: O00 | 1,000 1,000
I: resampler.c: Using resampler 'copy'
I: resampler.c: Using s16le as working format.
D: memblockq.c: memblockq requested: maxlength=33554432, tlength=0,
base=4, prebuf=0, minreq=1 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=33554432,
tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
I: source-output.c: Created output 3 "SFLphone in" on
alsa_input.pci_8086_284b_sound_card_0 with sample spec s16le 1ch 44100Hz
and channel map mono
D: memblockq.c: memblockq requested: maxlength=66500, tlength=0, base=2,
prebuf=1, minreq=0 maxrewind=0
D: memblockq.c: memblockq sanitized: maxlength=66500, tlength=66500,
base=2, prebuf=2, minreq=2 maxrewind=0
I: protocol-native.c: Final latency 753,97 ms = 753,97 ms + 0,00 ms
I: module-suspend-on-idle.c: Source
alsa_input.pci_8086_284b_sound_card_0 idle for too long, suspending ...
I: alsa-source.c: Device suspended...
D: module-hal-detect.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0,
member=PropertyModified
D: bluetooth-util.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0,
member=PropertyModified
D: module-console-kit.c: dbus: interface=org.freedesktop.Hal.Device,
path=/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT0,
member=PropertyModified
D: sink-input.c: Requesting rewind due to uncorking
D: alsa-sink.c: Requested to rewind 14336 bytes.
D: alsa-sink.c: Limited to 10776 bytes.
D: alsa-sink.c: before: 2694
D: alsa-sink.c: after: 2694
D: alsa-sink.c: Rewound 10776 bytes.
D: sink.c: Processing rewind...
D: sink-input.c: Have to rewind 10776 bytes on render memblockq.
D: source.c: Processing rewind...
D: module-suspend-on-idle.c: Sink alsa_output.pci_8086_284b_sound_card_0
becomes busy.
I: alsa-source.c: Trying resume...
D: alsa-source.c: hwbuf_unused=0
D: alsa-source.c: setting avail_min=1
I: alsa-source.c: Resumed successfully...
D: module-suspend-on-idle.c: Source
alsa_input.pci_8086_284b_sound_card_0 becomes busy.
D: protocol-native.c: Requesting rewind due to end of underrun.
D: alsa-sink.c: Requested to rewind 14336 bytes.
D: alsa-sink.c: Limited to 10776 bytes.
D: alsa-sink.c: before: 2694
D: alsa-sink.c: after: 2694
D: alsa-sink.c: Rewound 10776 bytes.
D: sink.c: Processing rewind...
D: sink-input.c: Have to rewind 10776 bytes on render memblockq.
D: sink-input.c: Have to rewind 10776 bytes on render memblockq.
D: source.c: Processing rewind...
D: protocol-native.c: Underrun on 'SFLphone out', 0 bytes in queue.

from this point there's only silence from sflphone.

> 
> 
> -- 
> Andrés Mauricio Mujica Zalamea <andres.mujica at seaq.com.co>
> SEAQ SERVICIOS CIA LTDA
> 
> _______________________________________________
> SFLphone mailing list
> SFLphone at lists.savoirfairelinux.net
> http://lists.savoirfairelinux.net/mailman/listinfo/sflphone

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.savoirfairelinux.net/pipermail/sflphone/attachments/20090620/6575a034/attachment.htm 